|
 Cabinet Heater
|
CABHTR100WNC
|
Control panel enclosure heater, includes 100w, 120v heater. Recommended for winter design temperature less than 0°F. Operates on PCB controls in IBT Single Modules or RTU
|
|
|
CABHTR200W
|
Control panel enclosure heater, includes 200w, 120v heater and thermostat (10 degree setting). Requires convenience outlet option (power by others). Recommended for winter design temperature less than 0°F. - Old Controls
|
|
|
CABHTR200W2X
|
Control panel enclosure heater for two IBT burner modules, includes (2) 200w, 120v heater. Recommended for winter design temperature less than 0°F.
|
|
|
IBT Condensation Kit- 1
|
Factory Assembled IBT Condensation Drain Kit for 1 Furnace Units. Required for Winter Design Temp of 0 degrees F and lower.
Kit includes drain assembly, mounting screws, zip ties, and heat tape for single furnace unit. Field piping from unit by others.
|
|
|
IBT Condensation Kit- 2
|
Factory Assembled IBT Condensation Drain Kit for 2 Furnace Units. Required for Winter Design Temp of 0 degrees F and lower.
Kit includes drain assembly, mounting screws, zip ties, and heat tape for double furnace unit. Field piping from unit by others.
|
|
|
IBT Condensation Kit- 3
|
Factory Assembled IBT Condensation Drain Kit for 3 Furnace Units. Required for Winter Design Temp of 0 degrees F and lower.
Kit includes drain assembly, mounting screws, zip ties, and heat tape for triple furnace unit. Field piping from unit by others.
|
|
|
IBT Condensation Kit- 4
|
Factory Assembled IBT Condensation Drain Kit for 4 Furnace Units. Required for Winter Design Temp of 0 degrees F and lower.
Kit includes drain assembly, mounting screws, zip ties, and heat tape for triple furnace unit. Field piping from unit by others.
|
|
|
RTU Heated Drain
|
Factory Assembled Heated Drain Kit for RTU. Required for Winter Design Temp of 0 degrees F and lower.
|
|
|
|
|
